Manual Import Guide for Secure Boot Keys (PK, KEK, DB)
I. Prepare Key Files
Please save the following files to the root directory of a FAT32-formatted USB drive in advance. Note that NTFS-formatted media may not be recognized by the system firmware during the import process:
Download link: https://1drv.ms/u/c/8308e38628730ebe/IQC-2dintfD1Q4YbZc108V_nAesDvnhX7HkIH1yyUFwHhd4?e=tUu8gk
Ø Microsoft KEK Certificate: microsoft corporation kek 2k ca 2023.crt
Ø Microsoft DB Certificate: microsoft uefi ca 2023.crt
Ø Microsoft PK Certificate: windows oem devices pk.cer
II. Enter BIOS Setup Interface
1. With the PC powered off, press the power button to turn it on, then immediately and repeatedly press the Delete key until the BIOS setup utility loads.
III. Modify Secure Boot Mode
After entering the BIOS, follow these steps:
1. Use the arrow keys to navigate to the Security tab.
2. Locate and enter the Secure Boot submenu.

3. Find the Secure Boot Mode option, and set its value to Custom.

IV. Clear Existing Keys (Enter Setup Mode)
1. Under the Secure Boot menu, locate and enter the Key Management submenu.

2. Select Reset To Setup Mode.

3. Select Yes to confirm the operation.

4. When the system prompts Reset without saving, select No to retain the current temporary configuration.

V. Import the Microsoft KEK Certificate
1. In the Key Management interface, locate Key Exchange Keys and press Enter to open its configuration menu.

2. Select Update.

3. When prompted, select No to load the key from a file on external media.

4. When prompted to select a file system, choose your USB drive and press Enter to confirm.

5. Select the Microsoft KEK certificate from the USB drive: microsoft corporation kek 2k ca 2023.crt.

6. Select Public Key Certificate.

7. In the pop-up Enter Certificate Owner GUID menu, press Enter directly to keep the default value.

8. When prompted to confirm the certificate import, select Yes to confirm.

9. A success message will appear on the screen. Press Enter to acknowledge and return to the previous menu.

VI. Import the Microsoft DB Certificate
1. In the Key Management interface, locate Authorized Signatures and press Enter to open its configuration menu.

2. Select Update.

3. When prompted, select No to load the key from a file on external media.

4. When prompted to select a file system, choose your USB drive and press Enter to confirm.

5. Select the Microsoft DB certificate from the USB drive: microsoft uefi ca 2023.crt.

6. Select Public Key Certificate.

7. In the pop-up Enter Certificate Owner GUID menu, press Enter directly to keep the default value.

8. When prompted to confirm the certificate import, select Yes to confirm.

9. A success message will appear on the screen. Press Enter to acknowledge and return to the previous menu.

VII. Import the Microsoft PK Certificate
1. In the Key Management interface, locate Platform Key (PK) and press Enter to open its configuration menu.

2. Select Update.

3. When prompted, select No to load the key from a file on external media.

4. When prompted to select a file system, choose your USB drive and press Enter to confirm.

5. Select the Microsoft PK certificate from the USB drive: windows oem devices pk.cer.

6. Select Public Key Certificate.

7. In the pop-up Enter Certificate Owner GUID menu, press Enter directly to keep the default value.

8. When prompted to confirm the certificate import, select Yes to confirm.

9. A success message will appear on the screen. Press Enter to acknowledge and return to the previous menu.

10. When the system prompts Reset without saving, select No to retain all imported keys.

VIII. Save Settings and Exit
1. Press F4 to save the changes and exit.
2. When the confirmation prompt appears, select Yes. The system will save the settings and reboot automatically.

After the system restarts, the full set of Secure Boot keys (KEK, DB, PK) has been successfully imported and activated.